BMC Mainview for z/OS Resource Class must be defined or active in the ACP.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
medium	V-224613	SRG-OS-000309	ZMVZT038	SV-224613r987853_rule	2025-02-24	7

Description
Failure to use a robust ACP to control a product could potentially compromise the integrity and availability of the MVS operating system and user data.

ℹ️ Check
Refer to the following report produced by the ACP Data Collection: - TSSCMDS.RPT(#RDT) If the BMC Mainview for z/OS Resource Class(es) is (are) defined in the Resource Definition Table (RDT) as follows, this is not a finding. RESOURCE CLASS = class RESOURCE CODE = X'hex code' ATTRIBUTE = MASK\|NOMASK,MAXOWN(08),MAXPERMIT(044),ACCESS,DEFPROT ACCESS = NONE(0000),CONTROL(0400),UPDATE(6000),READ(4000) ACCESS = WRITE(2000),ALL(FFFF) DEFACC = READ

ℹ️ Check

Refer to the following report produced by the ACP Data Collection: - TSSCMDS.RPT(#RDT) If the BMC Mainview for z/OS Resource Class(es) is (are) defined in the Resource Definition Table (RDT) as follows, this is not a finding. RESOURCE CLASS = class RESOURCE CODE = X'hex code' ATTRIBUTE = MASK|NOMASK,MAXOWN(08),MAXPERMIT(044),ACCESS,DEFPROT ACCESS = NONE(0000),CONTROL(0400),UPDATE(6000),READ(4000) ACCESS = WRITE(2000),ALL(FFFF) DEFACC = READ

✔️ Fix
The ISSO will ensure the BMC Mainview for z/OS resource class(es) is (are) defined in the TSS RDT. (Note: The RESCLASS and/or RESCODE identified below are examples of a possible installation. The actual RESCLASS and/or RESCODE values are determined when the product is actually installed on a system through the product's installation guide and can be site specific.) Use the following commands as an example: TSS ADDTO(RDT) RESCLASS(BMCVIEW) - RESCODE(3B) DEFACC(READ) - ATTR(MASK\|NOMASK,DEFPROT,LONG,GENERIC) - ACLST(NONE,READ,UPDATE,ALL)

✔️ Fix

The ISSO will ensure the BMC Mainview for z/OS resource class(es) is (are) defined in the TSS RDT. (Note: The RESCLASS and/or RESCODE identified below are examples of a possible installation. The actual RESCLASS and/or RESCODE values are determined when the product is actually installed on a system through the product's installation guide and can be site specific.) Use the following commands as an example: TSS ADDTO(RDT) RESCLASS(BMCVIEW) - RESCODE(3B) DEFACC(READ) - ATTR(MASK|NOMASK,DEFPROT,LONG,GENERIC) - ACLST(NONE,READ,UPDATE,ALL)