The Photon operating system must generate audit records when successful/unsuccessful attempts to access privileges occur.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
medium	V-258813	SRG-OS-000064-GPOS-00033	PHTN-40-000031	SV-258813r958446_rule	2024-07-11	2

Description
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users. Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210, SRG-OS-000468-GPOS-00212, SRG-OS-000474-GPOS-00219

Description

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users. Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210, SRG-OS-000468-GPOS-00212, SRG-OS-000474-GPOS-00219

ℹ️ Check
At the command line, run the following command to verify an audit rule exists to audit account creations: # auditctl -l \| grep chmod Expected result: -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid>=1000 -F auid!=-1 -F key=perm_mod -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid=0 -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid>=1000 -F auid!=-1 -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid=0 -F key=perm_mod If the output does not match the expected result, this is a finding. Note: This check depends on the "auditd" service to be in a running state for accurate results. The "auditd" service is enabled in control PHTN-40-000016. Note: auid!=-1, auid!=4294967295, auid!=unset are functionally equivalent in this check and the output of the above commands may be displayed in either format.

ℹ️ Check

At the command line, run the following command to verify an audit rule exists to audit account creations: # auditctl -l | grep chmod Expected result: -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid>=1000 -F auid!=-1 -F key=perm_mod -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid=0 -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid>=1000 -F auid!=-1 -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid=0 -F key=perm_mod If the output does not match the expected result, this is a finding. Note: This check depends on the "auditd" service to be in a running state for accurate results. The "auditd" service is enabled in control PHTN-40-000016. Note: auid!=-1, auid!=4294967295, auid!=unset are functionally equivalent in this check and the output of the above commands may be displayed in either format.

✔️ Fix
Navigate to and open: /etc/audit/rules.d/audit.STIG.rules Add or update the following lines: -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid=0 -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid=0 -F key=perm_mod At the command line, run the following command to load the new audit rules: # /sbin/augenrules --load Note: An "audit.STIG.rules" file is provided with this guidance for placement in "/etc/audit/rules.d" that contains all rules needed for auditd. Note: An older "audit.STIG.rules" may exist and may reference older "GEN" SRG IDs. This file can be removed and replaced as necessary with an updated one.

✔️ Fix

Navigate to and open: /etc/audit/rules.d/audit.STIG.rules Add or update the following lines: -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid=0 -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F auid=0 -F key=perm_mod At the command line, run the following command to load the new audit rules: # /sbin/augenrules --load Note: An "audit.STIG.rules" file is provided with this guidance for placement in "/etc/audit/rules.d" that contains all rules needed for auditd. Note: An older "audit.STIG.rules" may exist and may reference older "GEN" SRG IDs. This file can be removed and replaced as necessary with an updated one.