The ESXi host client must be configured with an idle session timeout.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
medium	V-258731	SRG-OS-000029-VMM-000100	ESXI-80-000010	SV-258731r933254_rule	2023-10-11	1

Description
The ESXi host client is the UI served up by the host itself, outside of vCenter. It is accessed at https://<ESX FQDN>/ui. ESXi is not usually administered via this interface for long periods, and all users will be highly privileged. Implementing a mandatory session idle limit will ensure that orphaned, forgotten, or ignored sessions will be closed promptly.

ℹ️ Check
From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Select the "UserVars.HostClientSessionTimeout" value and verify it is set to "900" or less. or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost \| Get-AdvancedSetting -Name UserVars.HostClientSessionTimeout If the "UserVars.HostClientSessionTimeout" setting is not set to "900" or less, this is a finding.

ℹ️ Check

From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Select the "UserVars.HostClientSessionTimeout" value and verify it is set to "900" or less. or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost | Get-AdvancedSetting -Name UserVars.HostClientSessionTimeout If the "UserVars.HostClientSessionTimeout" setting is not set to "900" or less, this is a finding.

✔️ Fix
From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Click "Edit". Select the "UserVars.HostClientSessionTimeout" value and configure it to "900". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost \| Get-AdvancedSetting -Name UserVars.HostClientSessionTimeout \| Set-AdvancedSetting -Value "900"

✔️ Fix

From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Click "Edit". Select the "UserVars.HostClientSessionTimeout" value and configure it to "900". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost | Get-AdvancedSetting -Name UserVars.HostClientSessionTimeout | Set-AdvancedSetting -Value "900"