The NSX Manager must retain the Standard Mandatory DOD Notice and Consent Banner on the screen until the administrator acknowledges the usage conditions and takes explicit actions to log on for further access.

Severity
Group ID
Group Title
Version
Rule ID
Date
STIG Version
mediumV-265295SRG-APP-000069-NDM-000216NMGR-4X-000014SV-265295r994108_rule2024-12-131
Description
The banner must be acknowledged by the administrator prior to the device allowing the administrator access to the network device. This provides assurance that the administrator has seen the message and accepted the conditions for access. If the consent banner is not acknowledged by the administrator, DOD will not be in compliance with system use notifications required by law. To establish acceptance of the network administration policy, a click-through banner at management session logon is required. The device must prevent further activity until the administrator executes a positive action to manifest agreement. In the case of CLI access using a terminal client, entering the username and password when the banner is presented is considered an explicit action of acknowledgement. Entering the username, viewing the banner, then entering the password is also acceptable.
ℹ️ Check
From the NSX Manager web interface, go to System >> Settings >> General Settings >> User Interface. Review the Login Consent Settings. Verify "Login Consent" is not On. Verify "Require Explicit User Consent" is set to Yes. If the Standard Mandatory DOD Notice and Consent Banner is not retained on the screen until the administrator acknowledges the usage conditions and takes explicit actions to log on for further access, this is a finding.
✔️ Fix
From the NSX Manager web interface, go to System >> Settings >> General Settings >> User Interface. Under Login Consent Settings, click "Edit". Toggle "Login Consent" to On. Toggle "Require Explicit User Consent" to Yes. Note: The banner text is also entered; however, that is covered by NMGR-4X-000013.