The TPS must generate a log record so an alert can be configured to, at a minimum, the system administrator when malicious code is detected.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
high	V-242199	SRG-NET-000248-IDPS-00206	TIPP-IP-000360	SV-242199r1018785_rule	2024-09-16	2

Description
Without an alert, security personnel may be unaware of an impending failure of the audit capability, and the ability to perform forensic analysis and detect rate-based and other anomalies will be impeded. The TPS generates an immediate (within seconds) alert which notifies designated personnel of the incident. Sending a message to an unattended log or console does not meet this requirement since that will not be seen immediately. These messages should include a severity level indicator or code as an indicator of the criticality of the incident. Satisfies: SRG-NET-000248-IDPS-00206, SRG-NET-000249-IDPS-00222, SRG-NET-000385-IDPS-00210

Description

Without an alert, security personnel may be unaware of an impending failure of the audit capability, and the ability to perform forensic analysis and detect rate-based and other anomalies will be impeded. The TPS generates an immediate (within seconds) alert which notifies designated personnel of the incident. Sending a message to an unattended log or console does not meet this requirement since that will not be seen immediately. These messages should include a severity level indicator or code as an indicator of the criticality of the incident. Satisfies: SRG-NET-000248-IDPS-00206, SRG-NET-000249-IDPS-00222, SRG-NET-000385-IDPS-00210

ℹ️ Check
1. In the Trend Micro SMS, navigate to "Profiles" and "Shared Settings". 2. Under "Action Sets, if "Remote Syslog", are not enabled for both the "Block+Notify" and "Block+Notify+Trace", this is a finding.

✔️ Fix
1. In the Trend Micro SMS, navigate to "Profiles" and "Shared Settings". 2. Under "Action Sets: a. Select "Block+Notify" and edit. b. Select Notifications, and check "Remote Syslog". c. Select "Finish".