The SEL-2740S must be configured to packet capture flows.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
medium	V-92317	SRG-NET-000331-L2S-000001	SELS-SW-000070	SV-102405r1_rule	2019-05-06	1

Description
Without the capability to select a user session to capture/record or view/hear, investigations into suspicious or harmful events would be hampered by the volume of information captured. The volume of information captured may also adversely impact the operation for the network. Session audits may include port mirroring, tracking websites visited, and recording information and/or file transfers.

ℹ️ Check
Review the SEL-2740S flow rules to ensure they only include the specific copy rules for capturing ingress and egress flows only on the designated port(s). Note: A span port can be created to capture based on Flows, ports, or combination. If the SEL-2740S is configured with flows with wildcard or unnecessary packet forwarding rules, this is a finding.

✔️ Fix
Add specific SEL-2740S flow rules for capturing a copy of packets for user sessions use OpenFlow ALL Groups. To add an SEL-2740S Group, do the following: 1. Log on to OTSDN Controller using Permission Level 3. 2. Under "Group Entry" General Settings, select "Group ID" and "Group Type". 3. Select appropriate number of Action Buckets dependent upon use case. 4. Determine valid watch port or group, and select supported actions. 5. Click "Submit".

✔️ Fix

Add specific SEL-2740S flow rules for capturing a copy of packets for user sessions use OpenFlow ALL Groups. To add an SEL-2740S Group, do the following: 1. Log on to OTSDN Controller using Permission Level 3. 2. Under "Group Entry" General Settings, select "Group ID" and "Group Type". 3. Select appropriate number of Action Buckets dependent upon use case. 4. Determine valid watch port or group, and select supported actions. 5. Click "Submit".