The router must be configured to implement message authentication for all control plane protocols.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
medium	V-216982	SRG-NET-000230	SRG-NET-000230-RTR-000001	SV-216982r945861_rule	2024-05-28	5

Description
A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to learn confidential information about the site's network or used to disrupt the network's ability to communicate with other networks. This is known as a "traffic attraction attack" and is prevented by configuring neighbor router authentication for routing updates. This requirement applies to all IPv4 and IPv6 protocols that are used to exchange routing or packet forwarding information. This includes BGP, RIP, OSPF, EIGRP, IS-IS and LDP.

Description

A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to learn confidential information about the site's network or used to disrupt the network's ability to communicate with other networks. This is known as a "traffic attraction attack" and is prevented by configuring neighbor router authentication for routing updates. This requirement applies to all IPv4 and IPv6 protocols that are used to exchange routing or packet forwarding information. This includes BGP, RIP, OSPF, EIGRP, IS-IS and LDP.

ℹ️ Check
Review the router configuration. For every protocol that affects the routing or forwarding tables (where information is exchanged between neighbors), verify that neighbor router authentication is enabled. If authentication is not enabled, this is a finding.

✔️ Fix
Configure authentication to be enabled for every protocol that affects the routing or forwarding tables.