The Oracle Linux operating system must not have unauthorized IP tunnels configured.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
medium	V-221893	SRG-OS-000480-GPOS-00227	OL07-00-040820	SV-221893r991589_rule	2025-02-20	3

Description
IP tunneling mechanisms can be used to bypass network filtering. If tunneling is required, it must be documented with the Information System Security Officer (ISSO).

ℹ️ Check
Verify the system does not have unauthorized IP tunnels configured. Check to see if "libreswan" is installed with the following command: # yum list installed libreswan libreswan.x86-64 3.20-5.el7_4 If "libreswan" is installed, check to see if the "IPsec" service is active with the following command: # systemctl status ipsec ipsec.service - Internet Key Exchange (IKE) Protocol Daemon for IPsec Loaded: loaded (/usr/lib/systemd/system/ipsec.service; disabled) Active: inactive (dead) If the "IPsec" service is active, check to see if any tunnels are configured in "/etc/ipsec.conf" and "/etc/ipsec.d/" with the following commands: # grep -iw conn /etc/ipsec.conf /etc/ipsec.d/*.conf If there are indications that a "conn" parameter is configured for a tunnel, ask the System Administrator if the tunnel is documented with the ISSO. If "libreswan" is installed, "IPsec" is active, and an undocumented tunnel is active, this is a finding.

ℹ️ Check

Verify the system does not have unauthorized IP tunnels configured. Check to see if "libreswan" is installed with the following command: # yum list installed libreswan libreswan.x86-64 3.20-5.el7_4 If "libreswan" is installed, check to see if the "IPsec" service is active with the following command: # systemctl status ipsec ipsec.service - Internet Key Exchange (IKE) Protocol Daemon for IPsec Loaded: loaded (/usr/lib/systemd/system/ipsec.service; disabled) Active: inactive (dead) If the "IPsec" service is active, check to see if any tunnels are configured in "/etc/ipsec.conf" and "/etc/ipsec.d/" with the following commands: # grep -iw conn /etc/ipsec.conf /etc/ipsec.d/*.conf If there are indications that a "conn" parameter is configured for a tunnel, ask the System Administrator if the tunnel is documented with the ISSO. If "libreswan" is installed, "IPsec" is active, and an undocumented tunnel is active, this is a finding.

✔️ Fix
Remove all unapproved tunnels from the system, or document them with the ISSO.