Protocol Independent Multicast (PIM) join messages received from a downstream multicast Designated Routers (DR) must be filtered for any reserved or any other undesirable multicast groups.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
low	V-251393	NET2011	NET2011	SV-251393r806134_rule	2024-08-02	10

Description
Customer networks that do not maintain a multicast domain and only require the IP multicast service will be required to stand up a PIM-SM router that will be incorporated into the JIE shared tree structure by establishing a peering session with an RP router. Both of these implementations expose several risks that must be mitigated to provide a secure IP core network. All RP routers that are peering with customer PIM-SM routers must implement a PIM import policy to block multicast join requests for reserved or any other undesirable multicast groups.

Description

Customer networks that do not maintain a multicast domain and only require the IP multicast service will be required to stand up a PIM-SM router that will be incorporated into the JIE shared tree structure by establishing a peering session with an RP router. Both of these implementations expose several risks that must be mitigated to provide a secure IP core network. All RP routers that are peering with customer PIM-SM routers must implement a PIM import policy to block multicast join requests for reserved or any other undesirable multicast groups.

ℹ️ Check
Verify that the RP router is configured to filter PIM join messages for any reserved multicast groups using the ip pim accept-rp global command as shown in the example below. The ip pim accept-rp global command causes the router to accept only (*, G) join messages destined for the specified RP address as allowed by the referenced access-list. ip pim accept-rp 10.10.2.1 PIM_JOIN_FILTER ! ip access-list standard PIM_JOIN_FILTER deny 224.0.1.2 deny 224.0.1.3 deny 224.0.1.8 deny 224.0.1.22 deny 224.0.1.24 deny 224.0.1.25 ... ... ... deny 225.1.2.3 deny 229.55.150.208 deny 234.42.42.42 255.255.255.252 deny 239.0.0.0 0.255.255.255 permit any Note: IOS 12.4T extends the ip multicast-routing command with a group-range or access-list argument that can be used to filter multicast control (PIM, IGMP) and data packets for unauthorized groups. If the RP router peering with customer PIM-SM routers is not configured with a PIM import policy to block join messages for reserved and any undesirable multicast groups, this is a finding.

ℹ️ Check

Verify that the RP router is configured to filter PIM join messages for any reserved multicast groups using the ip pim accept-rp global command as shown in the example below. The ip pim accept-rp global command causes the router to accept only (*, G) join messages destined for the specified RP address as allowed by the referenced access-list. ip pim accept-rp 10.10.2.1 PIM_JOIN_FILTER ! ip access-list standard PIM_JOIN_FILTER deny 224.0.1.2 deny 224.0.1.3 deny 224.0.1.8 deny 224.0.1.22 deny 224.0.1.24 deny 224.0.1.25 ... ... ... deny 225.1.2.3 deny 229.55.150.208 deny 234.42.42.42 255.255.255.252 deny 239.0.0.0 0.255.255.255 permit any Note: IOS 12.4T extends the ip multicast-routing command with a group-range or access-list argument that can be used to filter multicast control (PIM, IGMP) and data packets for unauthorized groups. If the RP router peering with customer PIM-SM routers is not configured with a PIM import policy to block join messages for reserved and any undesirable multicast groups, this is a finding.

✔️ Fix
RP routers that are peering with customer PIM-SM routers must implement a PIM import policy to block join messages for reserved and any undesirable multicast groups.