Exchange Send connectors must be clearly named.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
low	V-221225	SRG-APP-000247	EX16-ED-000260	SV-221225r961155_rule	2024-12-06	2

Description
For Send connectors, unclear naming as to direction and purpose increases risk that messages may not flow as intended, troubleshooting efforts may be impaired, or incorrect assumptions may be made about the completeness of the configuration. Collectively, connectors should account for all connections required for the overall email topology design. Simple Mail Transfer Protocol (SMTP) connectors, when listed, must name purpose and direction clearly, and their counterparts on servers to which they connect should be recognizable as their partners.

Description

For Send connectors, unclear naming as to direction and purpose increases risk that messages may not flow as intended, troubleshooting efforts may be impaired, or incorrect assumptions may be made about the completeness of the configuration. Collectively, connectors should account for all connections required for the overall email topology design. Simple Mail Transfer Protocol (SMTP) connectors, when listed, must name purpose and direction clearly, and their counterparts on servers to which they connect should be recognizable as their partners.

ℹ️ Check
Open the Exchange Management Shell and enter the following command: Get-SendConnector \| Select Name, Identity Review the naming for connectors. For each send connector, if the connectors are not clearly named for purpose and direction, this is a finding.

✔️ Fix
Open the Exchange Management Shell and enter the following command: Set-SendConnector -Name <'NewName'> -Identity <'IdentityName'> Note: Both the <NewName> and <IdentityName> values must be in single quotes. Repeat the procedure for each send connector.