The storage system must only be operated in conjunction with an Active Directory server in a trusted environment if an LDAP server is not available.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
high	V-237827	SRG-OS-000001-GPOS-00001	HP3P-32-001507	SV-237827r647890_rule	2021-11-23	2

Description
Where strong account and password management capabilities are required, the 3PAR system is heavily dependent on its ability to use an AD server. Satisfies: SRG-OS-000001-GPOS-00001, SRG-OS-000104-GPOS-00051, SRG-OS-000480-GPOS-00227

ℹ️ Check
Determine if the system is configured for Active Directory (AD). Enter the following command: cli% showauthparam If the result returns an error, this is a finding. If the resulting output does include the parameters "groups-dn", "group-obj", or "group-name-attr" then the host is setup for LDAP, this requirement is not applicable. If the host is setup for Active Directory and these fields in the output are not configured, this is a finding. ldap-server <ip address of AD server> ldap-server-hn <host name of AD server> Next, verify that the AD authentication is operational by entering the following command: cli% checkpassword <username>: password: <Enter the password for username> If the username and password used in checkpassword are known to be valid AD credentials, and the following text is NOT displayed at the end of the resulting output, this is a finding. user <username> is authenticated and authorized Note: The "checkpassword" command will not display authenticated information even if AD is properly configured, if the username and password are not entered correctly.

ℹ️ Check

Determine if the system is configured for Active Directory (AD). Enter the following command: cli% showauthparam If the result returns an error, this is a finding. If the resulting output does include the parameters "groups-dn", "group-obj", or "group-name-attr" then the host is setup for LDAP, this requirement is not applicable. If the host is setup for Active Directory and these fields in the output are not configured, this is a finding. ldap-server <ip address of AD server> ldap-server-hn <host name of AD server> Next, verify that the AD authentication is operational by entering the following command: cli% checkpassword <username>: password: <Enter the password for username> If the username and password used in checkpassword are known to be valid AD credentials, and the following text is NOT displayed at the end of the resulting output, this is a finding. user <username> is authenticated and authorized Note: The "checkpassword" command will not display authenticated information even if AD is properly configured, if the username and password are not entered correctly.

✔️ Fix
Use this series of commands to configure the host to use Active Directory: cli% setauthparam -f ldap-server <AD server IP address> cli% setauthparam -f binding simple cli% setauthparam -f ldap-StartTLS require cli% setauthparam -f Kerberos-realm <Kerberos realm, such as WIN2K12FOREST.THISDOMAIN.COM> cli% setauthparam -f ldap-server-hn <fully qualified domain name of AD server, such as adserver.thisdomain.com> cli% setauthparam -f accounts-dn CN=Users,DC=win2k12forest,DC=thisdomain,DC=com cli% setauthparam -f user-dn-base CN=Users,DC=win2k12forest,DC=thisdomain,DC=com cli% setauthparam -f user-attr WIN2K12FOREST\\ cli% setauthparam -f account-obj user cli% setauthparam -f account-name-attr sAMAccountName cli% setauthparam -f memberof-attr memberOf cli% setauthparam -f browse-map "CN=<customer-assigned name of browse role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f edit-map "CN=<customer-assigned name of edit role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f service-map "CN=<customer-assigned name of service role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f super-map "CN=<customer-assigned name of super role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com"

✔️ Fix

Use this series of commands to configure the host to use Active Directory: cli% setauthparam -f ldap-server <AD server IP address> cli% setauthparam -f binding simple cli% setauthparam -f ldap-StartTLS require cli% setauthparam -f Kerberos-realm <Kerberos realm, such as WIN2K12FOREST.THISDOMAIN.COM> cli% setauthparam -f ldap-server-hn <fully qualified domain name of AD server, such as adserver.thisdomain.com> cli% setauthparam -f accounts-dn CN=Users,DC=win2k12forest,DC=thisdomain,DC=com cli% setauthparam -f user-dn-base CN=Users,DC=win2k12forest,DC=thisdomain,DC=com cli% setauthparam -f user-attr WIN2K12FOREST\\ cli% setauthparam -f account-obj user cli% setauthparam -f account-name-attr sAMAccountName cli% setauthparam -f memberof-attr memberOf cli% setauthparam -f browse-map "CN=<customer-assigned name of browse role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f edit-map "CN=<customer-assigned name of edit role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f service-map "CN=<customer-assigned name of service role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f super-map "CN=<customer-assigned name of super role>,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com"