The storage system must only be operated in conjunction with an LDAP server in a trusted environment if an Active Directory server is not available.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
high	V-237825	SRG-OS-000001-GPOS-00001	HP3P-32-001503	SV-237825r647884_rule	2021-11-23	2

Description
Where strong account and password management capabilities are required, the 3PAR system is heavily dependent on its ability to use an LDAP server. Satisfies: SRG-OS-000001-GPOS-00001, SRG-OS-000104-GPOS-00051, SRG-OS-000480-GPOS-00227

ℹ️ Check
Determine if the system is configured for LDAP. Enter the following command: cli% showauthparam If the output indicates an error, this is a finding. If the resulting output does not include group parameters "groups-dn", "group-obj", or "group-name-attr" then the host is configured to use Active Directory and this requirement is not applicable. If the host is using LDAP and the following fields of the output are not configured, this is a finding. ldap-server <ip address of LDAP server> ldap-server-hn <host name of LDAP server> Next, verify that the LDAP authentication is operational by entering the following command: cli% checkpassword <username> password: <Enter the password for username> If the username and password used in "checkpassword" are known to be valid LDAP credentials, and the following text is NOT displayed at the end of the resulting output, this is a finding. user <username> is authenticated and authorized Note: The "checkpassword" command will not display authenticated information even if LDAP is properly configured, if the username and password are not entered correctly.

ℹ️ Check

Determine if the system is configured for LDAP. Enter the following command: cli% showauthparam If the output indicates an error, this is a finding. If the resulting output does not include group parameters "groups-dn", "group-obj", or "group-name-attr" then the host is configured to use Active Directory and this requirement is not applicable. If the host is using LDAP and the following fields of the output are not configured, this is a finding. ldap-server <ip address of LDAP server> ldap-server-hn <host name of LDAP server> Next, verify that the LDAP authentication is operational by entering the following command: cli% checkpassword <username> password: <Enter the password for username> If the username and password used in "checkpassword" are known to be valid LDAP credentials, and the following text is NOT displayed at the end of the resulting output, this is a finding. user <username> is authenticated and authorized Note: The "checkpassword" command will not display authenticated information even if LDAP is properly configured, if the username and password are not entered correctly.

✔️ Fix
Use this series of commands to configure LDAP. cli% setauthparam -f ldap-server <ldap server IP address> cli% setauthparam -f ldap-server-hn <fully qualified domain name of ldap server, such as ldapserver.thisdomain.com> cli% setauthparam -f binding simple cli% setauthparam -f ldap-StartTLS require cli% setauthparam -f groups-dn ou=Groups,dc=thisdomain,dc=com cli% setauthparam -f user-dn-base ou=People,dc=thisdomain,dc=com cli% setauthparam -f user-attr uid cli% setauthparam -f group-obj groupofuniquenames cli% setauthparam -f group-name-attr cn cli% setauthparam -f member-attr uniqueMember cli% setauthparam -f browse-map "*" cli% setauthparam -f edit-map <customer-assigned name of edit role> <customer-assigned name of "edit" group> cli% setauthparam -f service-map <customer-assigned name of service role> <customer-assigned name of "service" group> cli% setauthparam -f super-map <customer-assigned name of super role> <customer-assigned name of "super" group>

✔️ Fix

Use this series of commands to configure LDAP. cli% setauthparam -f ldap-server <ldap server IP address> cli% setauthparam -f ldap-server-hn <fully qualified domain name of ldap server, such as ldapserver.thisdomain.com> cli% setauthparam -f binding simple cli% setauthparam -f ldap-StartTLS require cli% setauthparam -f groups-dn ou=Groups,dc=thisdomain,dc=com cli% setauthparam -f user-dn-base ou=People,dc=thisdomain,dc=com cli% setauthparam -f user-attr uid cli% setauthparam -f group-obj groupofuniquenames cli% setauthparam -f group-name-attr cn cli% setauthparam -f member-attr uniqueMember cli% setauthparam -f browse-map "*" cli% setauthparam -f edit-map <customer-assigned name of edit role> <customer-assigned name of "edit" group> cli% setauthparam -f service-map <customer-assigned name of service role> <customer-assigned name of "service" group> cli% setauthparam -f super-map <customer-assigned name of super role> <customer-assigned name of "super" group>