The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to limit the amount of source-active messages it accepts on a per-peer basis.
Severity | Group ID | Group Title | Version | Rule ID | Date | STIG Version |
|---|---|---|---|---|---|---|
| low | V-216732 | SRG-NET-000018-RTR-000009 | CISC-RT-000940 | SV-216732r531086_rule | 2024-11-25 | 3 |
| Description |
|---|
| To reduce any risk of a denial of service (DoS) attack from a rogue or misconfigured MSDP router, the router must be configured to limit the number of source-active messages it accepts from each peer. |
| ℹ️ Check |
|---|
| Review the router configuration to determine if it is configured to limit the amount of source-active messages it accepts on a per-peer basis. ip msdp peer x.1.28.2 remote-as nn ip msdp sa-filter in 10.1.28.2 list MSDP_SA_FILTER ip msdp sa-limit X.1.28.2 nnn If the router is not configured to limit the source-active messages it accepts, this is a finding. |
| ✔️ Fix |
|---|
| Configure the router to limit the amount of source-active messages it accepts from each peer. R8(config)#ip msdp sa-limit x.1.28.2 nnn |