The Cisco ASA must be configured to produce audit records containing information to establish where the events occurred.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
medium	V-239907	SRG-APP-000097-NDM-000227	CASA-ND-000280	SV-239907r960897_rule	2024-08-22	2

Description
In order to compile an accurate risk assessment and provide forensic analysis, it is essential for security personnel to know where events occurred, such as device hardware components, device software modules, session identifiers, filenames, host names, and functionality. Associating information about where the event occurred within the network device provides a means of investigating an attack; recognizing resource utilization or capacity thresholds; or identifying an improperly configured device.

Description

In order to compile an accurate risk assessment and provide forensic analysis, it is essential for security personnel to know where events occurred, such as device hardware components, device software modules, session identifiers, filenames, host names, and functionality. Associating information about where the event occurred within the network device provides a means of investigating an attack; recognizing resource utilization or capacity thresholds; or identifying an improperly configured device.

ℹ️ Check
Review the Cisco ASA configuration to verify that it is compliant with this requirement. The configuration should look similar to the example below. logging enable logging buffered informational Note: The ASA will log location (IP address or console) from where configuration commands are entered. If the ASA is not configured to generate audit records containing information to establish where the events occurred, this is a finding.

ℹ️ Check

Review the Cisco ASA configuration to verify that it is compliant with this requirement. The configuration should look similar to the example below. logging enable logging buffered informational Note: The ASA will log location (IP address or console) from where configuration commands are entered. If the ASA is not configured to generate audit records containing information to establish where the events occurred, this is a finding.

✔️ Fix
Configure the Cisco ASA as shown in the example below. ASA(config)# logging enable ASA(config)# logging buffered informational ASA(config)# end