Ubuntu 24.04 LTS must configure the uncomplicated firewall to rate-limit impacted network interfaces.

Severity	Group ID	Group Title	Version	Rule ID	Date	STIG Version
medium	V-270754	SRG-OS-000420-GPOS-00186	UBTU-24-600200	SV-270754r1066751_rule	2025-02-18	1

Description
Denial of service (DoS) occurs when a resource is not available for legitimate users, resulting in the organization not being able to accomplish its mission or causing it to operate at degraded capacity. This requirement addresses the configuration of Ubuntu 24.04 LTS to mitigate the impact of DoS attacks that have occurred or are ongoing on system availability. For each system, known and potential DoS attacks must be identified and solutions for each type implemented. A variety of technologies exist to limit or, in some cases, eliminate the effects of DoS attacks (e.g., limiting processes or establishing memory partitions). Employing increased capacity and bandwidth, combined with service redundancy, may reduce the susceptibility to some DoS attacks.

Description

Denial of service (DoS) occurs when a resource is not available for legitimate users, resulting in the organization not being able to accomplish its mission or causing it to operate at degraded capacity. This requirement addresses the configuration of Ubuntu 24.04 LTS to mitigate the impact of DoS attacks that have occurred or are ongoing on system availability. For each system, known and potential DoS attacks must be identified and solutions for each type implemented. A variety of technologies exist to limit or, in some cases, eliminate the effects of DoS attacks (e.g., limiting processes or establishing memory partitions). Employing increased capacity and bandwidth, combined with service redundancy, may reduce the susceptibility to some DoS attacks.

ℹ️ Check
Verify an application firewall is configured to rate limit any connection to the system. Check all the services listening to the ports with the following command: $ ss -l46ut Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process tcp LISTEN 0 511 :http :* tcp LISTEN 0 128 [::]:ssh [::]:* tcp LISTEN 0 128 [::]:ipp [::]:* tcp LISTEN 0 128 [::]:smtp [::]:* For each entry, verify the Uncomplicated Firewall (ufw) is configured to rate limit the service ports with the following command: $ sudo ufw status Status: active To Action From -- ------ ---- 80/tcp LIMIT Anywhere 25/tcp LIMIT Anywhere Anywhere DENY 177.60.7.4 443 LIMIT Anywhere 22/tcp LIMIT Anywhere 80/tcp (v6) LIMIT Anywhere 25/tcp (v6) LIMIT Anywhere 22/tcp (v6) LIMIT Anywhere (v6) 25 DENY OUT Anywhere 25 (v6) DENY OUT Anywhere (v6) If any port with a state of "LISTEN" that does not have an action of "DENY", is not marked with the "LIMIT" action, this is a finding. If the Status is set to anything other than "active" this is a finding.

ℹ️ Check

Verify an application firewall is configured to rate limit any connection to the system. Check all the services listening to the ports with the following command: $ ss -l46ut Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process tcp LISTEN 0 511 *:http *:* tcp LISTEN 0 128 [::]:ssh [::]:* tcp LISTEN 0 128 [::]:ipp [::]:* tcp LISTEN 0 128 [::]:smtp [::]:* For each entry, verify the Uncomplicated Firewall (ufw) is configured to rate limit the service ports with the following command: $ sudo ufw status Status: active To Action From -- ------ ---- 80/tcp LIMIT Anywhere 25/tcp LIMIT Anywhere Anywhere DENY 177.60.7.4 443 LIMIT Anywhere 22/tcp LIMIT Anywhere 80/tcp (v6) LIMIT Anywhere 25/tcp (v6) LIMIT Anywhere 22/tcp (v6) LIMIT Anywhere (v6) 25 DENY OUT Anywhere 25 (v6) DENY OUT Anywhere (v6) If any port with a state of "LISTEN" that does not have an action of "DENY", is not marked with the "LIMIT" action, this is a finding. If the Status is set to anything other than "active" this is a finding.

✔️ Fix
Configure the application firewall to protect against or limit the effects of DoS attacks by ensuring Ubuntu 24.04 LTS is implementing rate-limiting measures on impacted network interfaces. To change the Status of ufw to "active" use the following command: $ sudo ufw enable Check all the services listening to the ports with the following command: $ sudo ss -l46ut Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process tcp LISTEN 0 128 [::]:ssh [::]:* For each service with a port listening to connections, run the following command, replacing "[service]" with the service that needs to be rate limited. $ sudo ufw limit [service] Rate-limiting can also be done on an interface. An example of adding a rate-limit on the eth0 interface follows: $ sudo ufw limit in on eth0

✔️ Fix

Configure the application firewall to protect against or limit the effects of DoS attacks by ensuring Ubuntu 24.04 LTS is implementing rate-limiting measures on impacted network interfaces. To change the Status of ufw to "active" use the following command: $ sudo ufw enable Check all the services listening to the ports with the following command: $ sudo ss -l46ut Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process tcp LISTEN 0 128 [::]:ssh [::]:* For each service with a port listening to connections, run the following command, replacing "[service]" with the service that needs to be rate limited. $ sudo ufw limit [service] Rate-limiting can also be done on an interface. An example of adding a rate-limit on the eth0 interface follows: $ sudo ufw limit in on eth0