The out-of-band management (OOBM) Arista gateway router must be configured to have separate IGP instances for the managed network and management network.

Severity
Group ID
Group Title
Version
Rule ID
Date
STIG Version
mediumV-256005SRG-NET-000019-RTR-000011ARST-RT-000190SV-256005r882357_rule2025-02-202
Description
If the gateway router is not a dedicated device for the OOBM network, implementation of several safeguards for containment of management and production traffic boundaries must occur. Since the managed and management network are separate routing domains, configuration of separate Interior Gateway Protocol routing instances is critical on the router to segregate traffic from each network.
ℹ️ Check
This requirement is not applicable for the DODIN backbone. Verify the OOBM interface is an adjacency in the Interior Gateway Protocol routing domain for the management network. Verify interface configuration that the OOBM management network subnet is configured. Step 1: To verify ospf process 100 interface is configured, execute the command "show run int YY". To verify vrf instance, execute "show vrf". Verify the OOBM vrf instance is configured. vrf instance OOBM ip routing vrf OOBM interface Vlan 2 description Connection to OOBM-LAN-Ethernet4 vrf OOBM mtu 9214 no routerport ip address 10.1.12.7/31 Step 2: To verify OSPF process is configured as OOBM management network, execute the command "show run section router ospf 100". router ospf 100 vrf OOBM network 10.1.12.0/24 area 0.0.0.0 Step 3: To verify OSPF process 200 is enabled on a private network without any connectivity with the OSPF process in management network, execute the command "show run int YY". Verify the LAN vrf instance is configured. vrf instance LAN ip routing vrf LAN interface Ethernet8 vrf LAN description Connection to Private-LAN-Ethernet4 mtu 9214 no routerport ip address 172.16.35.135/31 Step 4: To verify OSPF process 200 is configured as Private-LAN network, execute the command "show run section router ospf 200". router ospf 200 vrf LAN network 172.16.35.0/24 area 0.0.0.0 If the router does not enforce that Interior Gateway Protocol instances configured on the OOBM gateway router peer only with their own routing domain, this is a finding.
✔️ Fix
This requirement is not applicable for the DODIN backbone. Configure the Arista router to enforce that Interior Gateway Protocol instances configured on the OOBM gateway router peer only with their own routing domain. Configuring OSPF: Step 1: Configure the interface and OOBM vrf instance. vrf instance OOBM ip routing vrf OOBM LEAF-1A(config)#interface Vlan 2 LEAF-1A(config-if-Vl2)#description Connection to OOBM-LAN-Ethernet4 LEAF-1A(config-if-Vl2)#vrf OOBM LEAF-1A(config-if-Vl2)#mtu 9214 LEAF-1A(config-if-Vl2)#no routerport LEAF-1A(config-if-Vl2)#ip address 10.1.12.7/31 Step 2: Advertise the subnet in OSPF process 100. LEAF-1A(config-router-rip)#router ospf 100 vrf OOBM LEAF-1A(config-router-ospf)#network 10.1.12.0/24 area 0.0.0.0 Step 3: Configure the interface and LAN vrf instance. vrf instance LAN ip routing vrf LAN LEAF-1A(config)#interface Ethernet8 LEAF-1A(config-if-Et8)#description Connection to Private-LAN-Ethernet4 LEAF-1A(config-if-Et8)#vrf LAN LEAF-1A(config-if-Et8)#mtu 9214 LEAF-1A(config-if-Et8)#no routerport LEAF-1A(config-if-Et8)#ip address 172.16.35.135/31 Step 4: Advertise the subnet in OSPF process 200. LEAF-1A(config-router-ospf)#router ospf 200 vrf LAN LEAF-1A(config-router-rip)#network 172.16.35.0/24 area 0.0.0.0